SM Type

SM TypeFEATURES

  • Medium bottom style to achieve the maximum individual capacity, while still maintaining the perfect fill and discharge characteristics of the original S type steel bucket
  • Monobloc pressed seamless construction. The smooth inner and outer surface finish, assist with a cleaner discharge of products.
  • Well suited to high temperature applications, or where heavy products or sharp products are likely to be elevated.

 

SM type steel bucketUSING RECOMMENDATIONS

  • Minimum bucket spacing: bucket depth “C” +5 mm.
  • For engineering purpose, we recommend use (Z-Y) + 10% as usable capacity.
  • Special thickness is available on request.
  • Venting holes are available in 5 patterns on request.

 

TECHNICAL SPECIFICATIONS

Note: Some models subject to availability. Steel elevator buckets are supplied complete with standard recessed holes. Special drilling is available on request.

Model Bucket Dimension*
(mm)
Mounting Holes
(mm)
Capacity(L) Weight per
Each
(Kgs)
Number
per m³
Length
A
Proj.
B
Depth
C
Thickness Center
to
Center
E
Number
of
Holes
Hole
Diameter
Distance
Down
D
X-Y (Z-Y)+10% Z-Y
SM0808 85 80 58 1.0 43 2 8 16 0.21 0.19 0.18 0.11 1080
SM1009 106 89 66 1.0 50 2 9 20 0.33 0.28 0.25 0.14 825
SM1312 138 120 88 1.5 70 2 9 25 0.82 0.7 0.64 0.4 675
SM1612 170 130 124 1.5/2.0 100 2 9 35 1.31 0.98 0.89 0.54/0.71 675
SM1614 167 147 112 1.5/2.0 100 2 9 30 1.58 1.32 1.20 0.63/0.8 540
SM1814 187 147 112 1.5 100 2 9 30 1.77 1.52 1.38 0.68 600
SM2314 234 147 112 1.5/2.0/2.5 120 2 9 32 2.30 1.96 1.78 0.81/1.08/1.38 600
SM2814 288 147 112 1.5/2.0/3.0 100 3 9 32 2.91 2.49 2.26 1.05/1.36/2.0 600
SM2015 208 152 112 1.5 100 2 9 32 2.00 1.68 1.53 0.75 480
SM2316 234 160 120 1.5 70 3 9 32 2.70 2.31 2.10 0.88 480
SM2616 264 165 130 2.0 80 3 11 35 3.28 2.81 2.55 1.4 480
SM2816 288 165 130 2.0/3.0 80 3 11 38 3.64 3.10 2.82 1.56/2.35 525
SM3016 308 165 135 2.0/3.0 100 3 9 36 3.88 3.20 2.90 1.65/2.5 420
SM3316 340 165 135 2.0/3.0 110 3 11 38 4.40 3.85 3.50 1.9/2.9 420
SM3516 361 165 135 2.0 89 4 11 38 4.50 4.02 3.65 1.88 350
SM2818 290 182 138 2.0/2.5/3.0 80 3 11 38 4.50 3.85 3.50 1.72/2.08/2.58 280
SM3018 308 182 140 2.0/3.0 100 3 9 36 4.50 3.85 3.50 1.8/2.7 1080
SM3318 340 182 140 2.0 110 3 11 38 5.20 4.40 4.00 2.05 825
SM3518 362 182 140 2.0/3.0 120 3 11 38 5.50 4.51 4.10 2.1/3.2 675
SM3718 385 195 140 2.5 89 4 11 38 6.40 5.39 4.90 2.8 675
SM3021 310 218 163 2.5 100 3 11 50 6.70 5.72 5.20 2.98 540
SM3321 340 215 163 2.0/3.0 120 3 11 50 7.20 6.22 5.65 2.32/3.5 600
SM3521 362 215 162 2.5 120 3 11 50 7.60 6.45 5.86 3.14 600
SM3721 383 215 160 2.5/3.0 89 4 11 50 8.60 7.13 6.48 3.27/3.94 600
SM4521 464 215 163 3.0 89 5 11 50 10.10 8.47 7.70 4.5 480
SM5021 515 215 163 3.0 100 5 11 50 11.25 9.80 8.91 4.8 480

 

 

 

ELEVATOR BUCKETS
elevator conveyor bucket, elevator buckets

·Over 12 different elevator bucket styles are available for agricultural and industrial applications. 
·A direct replacement for many other international brands. 
·Unique elevator bucket design with multiple patents. 
·Our elevator buckets are well regarded, worldwide for high price/quality ratio.

ELEVATOR BUCKET MATERIAL OPTIONS

Material Mild Steel Stainless HDPE Nylon 6 Reinforced Nylon PU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous 180+ 250+ 70 100 110 70
Max Temp℃ Peak 220 400 80 120 130 80

 

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ . 
Nylon: High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products. 
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products. 
Mild Steel: General purpose, long life, well suited to agricultural and industrial products. 
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.

MEASURE OF ELEVATOR BUCKET

bucket elevator parts,

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.

VENTING OPTION

elevator bucket dataVent Pattern 1
One row of 6mm or 8mm
holes in body with same hole
center and number of holes as
mounting holes in back.

 

 

elevator bucket

 

Vent Pattern 2
One row of 6mm or 8mm holes
in body on 25mm centers.

 

 

elevator bucket

 

Vent Pattern 3
Two rows of 6mm or 8mm holes
in body on 25mm centers.

 

 

pu elevator, hdpe bucket elevator

Vent Pattern 4
Two rows of 6mm or 8mm holes
in body on 25mm centers, three
holes of 6mm or 8mm on each
side.

 

 

elevator conveyor bucket

 

Custom Vent
Vented as required.