DM Type

FEATURES

DM Type
• Continuous Discharge elevator bucket for agricultural use. Suitable for low speed discharge elevators with belt speed of 0.5~0.8 mtrs/s.
• A perfect choice for products that are fragile or easily damaged. The low speed of discharge makes it an ideal bucket for moving products that need to be conveyed with minimal impact.

 

USING RECOMMENDATIONS

DM Type using recommendation
Minimum bucket spacing: bucket depth “C” +2 mm.
For engineering purposes, we recommend using“L” for usable capacity.
Mounting holes can be customized on request.

 

 

 

TECHNICAL SPECIFICATIONS

Model Bucket Dimension*
(mm)
Mounting Holes
(mm)
Capacity
(L)
Cartion Packaging
Length
A
Proj.
B
Depth
C
Center
to
Center
E
Number
of
Holes
Hole
Diameter
Distance
Down
D
F Dimension
L X W X H
(mm)
Number
per Carton
DM1010 105 110 129 50 2 9 48 142 0.70 650x450x500 108
DM1310 138 110 128 80 2 7 37 142 0.88 650x450x500 90
DM1413 143 143 172 93 2 9 52 186 1.60 650x450x500 42
DM1715 175 156 176 113 2 9 52 189 2.40 650x430x450 26
DM2017 207 179 194 139 2 9 60 215 3.60 650x430x450 20
DM2313 230 138 162 125 2 7 44 175 2.21 650x430x450 15
DM2917 296 173 197 110 3 9 60 217 5.26 650x430x450 24
DM2921 294 210 200 113 3 9 55 223 6.20 50x430x450 10

 

 

 

 

 

 

 

 

 

 

 

 

*Actual dimensions of the buckets will vary slightly depending on specified raw material. The dimensions shown above are for HDPE buckets. Size A, B and C for Nylon and Urethane buckets will be about dimensionally 2% larger than HDPE buckets.

ELEVATOR BUCKETS
elevator conveyor bucket, elevator buckets

·Over 12 different elevator bucket styles are available for agricultural and industrial applications. 
·A direct replacement for many other international brands. 
·Unique elevator bucket design with multiple patents. 
·Our elevator buckets are well regarded, worldwide for high price/quality ratio.

ELEVATOR BUCKET MATERIAL OPTIONS

Material Mild Steel Stainless HDPE Nylon 6 Reinforced Nylon PU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous 180+ 250+ 70 100 110 70
Max Temp℃ Peak 220 400 80 120 130 80

 

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ . 
Nylon: High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products. 
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products. 
Mild Steel: General purpose, long life, well suited to agricultural and industrial products. 
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.

MEASURE OF ELEVATOR BUCKET

bucket elevator parts,

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.

VENTING OPTION

elevator bucket dataVent Pattern 1
One row of 6mm or 8mm
holes in body with same hole
center and number of holes as
mounting holes in back.

 

 

elevator bucket

 

Vent Pattern 2
One row of 6mm or 8mm holes
in body on 25mm centers.

 

 

elevator bucket

 

Vent Pattern 3
Two rows of 6mm or 8mm holes
in body on 25mm centers.

 

 

pu elevator, hdpe bucket elevator

Vent Pattern 4
Two rows of 6mm or 8mm holes
in body on 25mm centers, three
holes of 6mm or 8mm on each
side.

 

 

elevator conveyor bucket

 

Custom Vent
Vented as required.