How to Choose an elevator bucket model number?

The key parameters to choosing an elevator bucket

A, B and C Size

In this case, A size is 270mm, B size is 160mm and C size is 142mm.

Bucket Type

Elevator buckets have the deep type (Like D and DS series) and shallow type (like S and DQ series). By comparison of the C size, it is easy to recognize which type of bucket you required.

From the bucket mouth, there is a flat type and a round type. Most of the buckets are in flat shapes, like our D, DS, S and DQ series. But we still have one bucket special, it is CC type.

Above is the mouth shape difference illustration.

In this case picture, it is the CC type.

It is the reference link: https://www.ytconveyor.com/whats-the-difference-of-d-elevator-cups-and-cc-elevator-cups/

Bucket Thickness

In this case, the bucket thickness is 7mm. But you really don’t need to care about it.

Our bucket is standard. We already have the mould for each model bucket, and you do not need to pay the mould cost. That means when you ask for the bucket from us for a certain model number, the thickness is fixed. And of course, it is most reasonable thickness by our continuous product improvement.

Material

Just tell us what you need, we have material HDPE, Nylon, and PU.

This is the link to the difference in materials: https://www.ytconveyor.com/what-material-is-used-for-the-elevator-bucket/

In this case, it is reinforced nylon. Commonly Nylon will be used in hot high-temperature circumstances.

Drilling Hole

In this case, there are three holes, and the hole diameter is 9mm, and use an M10 elevator bolt. The hole distance is 90mm.

You do not need to worry about this. We can customize it for you, it is free of charge.

Commonly the clients will ask for our standard. But still, there is a special installation requirement, that is ok.

How to Choose Now?

Now you got all the A, B, and C sizes, you can ask for the catalogue by email sales@yutungindustrial.com from us. Or you can check our website product page https://www.ytconveyor.com/product/ to check the most similar model number.

You do not need to meet your size exactly the same, a few difference is fine for your installation.

This is the CC catalogue, in this case, it is CC10x6. So you tell us your material requirement, and check the standard hole is fine for you. All is fine now.

Contact Us Now!

Actually, you don’t need to do anything, just send us an email at sales@ytconveyor.com or sales@yutungindustrial.com, and we will come back to you immediately.