SS Type

FEATURES

SS Type
• Shallow bottom style for higher capacity at closer bucket spacing.

• Monobloc pressed seamless construction. The Smooth inner and outer surface finish assist with a cleaner discharge of products.
• Well suited to high temperature applications, or where heavy products or sharp products are likely to be elevated .

 

SS Type using recommendationUSING RECOMMENDATIONS

• Minimum bucket spacing: bucket projection “B” or “B”-20mm
• Special thickness is available on request.
• Venting holes are available in 5 patterns on request.

 

TECHNICAL SPECIFICATIONS

Model Bucket Dimension*
(mm)
Mounting Holes
(mm)
Capacity(L) Weight
(Kgs)
Number
per m³
Length
A
Proj.
B
Depth
C
Thickness Center
to
Center
E
Number
of
Holes
Hole
Diameter
Distance
Down
D
X-Y (Z-Y)+5% Z-Y
SS1009 106 89 60 1.0 50 2 9 20 0.29 0.20 0.19 0.125 7200
SS1312 140 115 78 1.5 70 2 9 22 0.61 0.43 0.41 0.34 4200
SS1814 188 140 92 1.5 100 2 9 28 1.29 0.95 0.90 0.52 2450
SS2314 237 142 92 1.5 120 2 9 28 1.70 1.33 1.26 0.695 1680
SS2316 238 165 108 1.5/2.0 120 2 9 35 2.25 1.73 1.26 0.83/1.1 1360
SS2814 287 142 92 1.5 90 3 9 28 2.11 1.64 1.56 0.83 1260
SS2816 289 165 108 1.5/2.0 80 3 11 38 2.91 2.18 2.08 0.98/1.3 1020
SS3018 308 185 116 2.0 100 3 9 35 3.66 2.58 2.46 1.56 900
SS3316 330 165 108 2.0 100 3 9 38 3.30 2.53 2.41 1.55 1020
SS3021 310 217 140 2.0 100 3 11 38 5.50 4.20 4.00 2.05 600
SS3321 340 214 130 2.0/2.5 120 3 11 38 5.51 4.11 3.92 1.85/2.32 500
SS3721 384 214 130 2.5 89 4 11 38 6.18 4.39 4.18 2.25 500
SS4521 464 214 130 2.5 89 5 11 38 8.00 5.87 4.18 3.35 400
SS4626 465 260 170 2.5 95 5 11 50 10.70 7.35 7.00 5.6 350
SS5626 565 265 170 2.5 110 5 11 50 15.00 11.00 10.50 7.1 300

 

Note: Some Models subject to availability. Steel elevator buckets are supplied complete with standard recessed holes. Special drilling is available on request.

ELEVATOR BUCKETS
elevator conveyor bucket, elevator buckets

·Over 12 different elevator bucket styles are available for agricultural and industrial applications. 
·A direct replacement for many other international brands. 
·Unique elevator bucket design with multiple patents. 
·Our elevator buckets are well regarded, worldwide for high price/quality ratio.

ELEVATOR BUCKET MATERIAL OPTIONS

Material Mild Steel Stainless HDPE Nylon 6 Reinforced Nylon PU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous 180+ 250+ 70 100 110 70
Max Temp℃ Peak 220 400 80 120 130 80

 

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ . 
Nylon: High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products. 
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products. 
Mild Steel: General purpose, long life, well suited to agricultural and industrial products. 
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.

MEASURE OF ELEVATOR BUCKET

bucket elevator parts,

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.

VENTING OPTION

elevator bucket dataVent Pattern 1
One row of 6mm or 8mm
holes in body with same hole
center and number of holes as
mounting holes in back.

 

 

elevator bucket

 

Vent Pattern 2
One row of 6mm or 8mm holes
in body on 25mm centers.

 

 

elevator bucket

 

Vent Pattern 3
Two rows of 6mm or 8mm holes
in body on 25mm centers.

 

 

pu elevator, hdpe bucket elevator

Vent Pattern 4
Two rows of 6mm or 8mm holes
in body on 25mm centers, three
holes of 6mm or 8mm on each
side.

 

 

elevator conveyor bucket

 

Custom Vent
Vented as required.