DL Type


• Specially designed for chain conveyors with horizontal product transmission.
• Commonly used where there is a high demand for low damage to products where conventional elevator will not work or where there will be difficulties with loading and discharge of products.
• Ideal for handling grains, feeds, fertilizers, seeds, salt and chemicals, etc.


USING RECOMMENDATIONSDL-type using recommendation

• Dimension “G” is designed by referring to the conveyor chain pitch in the chain conveyors.
• Consult our engineer for the installation of DL buckets as various dimensions and figures are needed to be considered.





Model Bucket Dimension* (mm) Capacity(L) Cartion Packaging
E F G Dimension
per Carton
DL2412 246 132 61 / 282 122 127 1.20 650x430x450 60
DL2619 260 190 78.5 341 309 190 190.5 2.34 650x430x450 50
DL3115 310 160 78 / 354 149 158.75 2.30 650x450x500 40
DL3219 330 200 78 / 373 173 190.5 3.19 650x450x500 30
DL3319 368 198 103 440 400 173 190.5 4.00 650x450x500 20
DL3821 384 213 125 480 430 195 203.5 4.80 650x450x500 24
DL4013 406 133 69 / 430 110 127 2.00 650x450x500 40
DL6323 651 236 120 762 717 205 228.6 11.00 770x480x450 12











* Actual dimensions of the buckets will vary slightly depending on specified raw material. The dimensions shown above are for PP buckets. Size A, B and C for Nylon buckets will be about dimensionally 2% larger than PP buckets.

elevator conveyor bucket, elevator buckets

·Over 12 different elevator bucket styles are available for agricultural and industrial applications. 
·A direct replacement for many other international brands. 
·Unique elevator bucket design with multiple patents. 
·Our elevator buckets are well regarded, worldwide for high price/quality ratio.


Material Mild Steel Stainless HDPE Nylon 6 Reinforced Nylon PU
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous 180+ 250+ 70 100 110 70
Max Temp℃ Peak 220 400 80 120 130 80


HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ . 
Nylon: High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products. 
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products. 
Mild Steel: General purpose, long life, well suited to agricultural and industrial products. 
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.


bucket elevator parts,


A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.


elevator bucket dataVent Pattern 1
One row of 6mm or 8mm
holes in body with same hole
center and number of holes as
mounting holes in back.



elevator bucket


Vent Pattern 2
One row of 6mm or 8mm holes
in body on 25mm centers.



elevator bucket


Vent Pattern 3
Two rows of 6mm or 8mm holes
in body on 25mm centers.



pu elevator, hdpe bucket elevator

Vent Pattern 4
Two rows of 6mm or 8mm holes
in body on 25mm centers, three
holes of 6mm or 8mm on each



elevator conveyor bucket


Custom Vent
Vented as required.