AA Type

AA TypeFEATURES:


• Optimum industrial style elevator bucket with a heavy reinforced lip and corners and a thickened back wall for mounting strength.

• Well suited to conveying of ore, sand, gravel, coal, fertilizer, clay, salt, limestone and cements or any product.
• Weight reduction of up to 80% compared to traditional cast iron elevator buckets.
• Using less energy due to lighter material being used.
• Up to 25% more capacity than cast iron elevator buckets.
• Extended bucket and belt life, less maintenance, less elevator downtime.
• Cleaner discharge, reduced build-up in the bottom of the buckets.
• Non corrosive, non sparking, heat resistant, impact and abrasion resistant.

 

AA Type using recommendationUSING RECOMMENDATIONS
• Recommended minimum bucket spacing: bucket projection “B” × 2.
• Mounting holes can be customized on request.
• Venting holes are available in 5 patterns on request.

 

TECHNICAL SPECIFICATIONS

Model Bucket Dimension* (mm) Capacity(L) Standard
Spacing
(mm)
Weight
Per Each
(Kgs)
Number
per Carton
Length
A
Proj.
B
Depth
C
H
X-Y Z-Y
AA4X3 103 87 78 51 0.27 0.226 152 0.09 24
AA5X4 134 105 105 74 0.74 0.556 200 0.23 24
AA6X4 160 105 105 74 0.89 0.68 200 0.27 24
AA7X4 184 105 105 74 1.07 0.85 200 0.3 24
AA7X5 180 130 134 93 1.55 1.25 254 0.44 24
AA8X5 206 130 134 93 1.83 1.47 254 0.5 28
AA9X5 232 130 134 93 2.00 1.67 254 0.54 28
AA9X6 238 156 156 108 2.80 2.18 300 0.67 42
AA10X6 264 156 156 108 3.14 2.44 300 0.73 35
AA11X6 290 156 156 108 3.43 2.69 300 0.77 35
AA12X6 320 165 160 108 4.10 3.05 300 0.95 24
AA12X7 314 180 180 125 5.25 3.99 355 1.13 12
AA14X7 365 180 180 125 6.30 4.90 355 1.25 12
AA14X8 365 206 206 142 7.60 5.78 410 1.94 12
AA16X8 416 206 206 142 8.85 6.65 410 2.1 10
AA18X8 460 206 206 142 10.15 7.67 410 2.38 10
AA18X10 460 258 258 168 14.8 11.36 510 3.6 7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* Actual dimensions of the buckets will vary slightly depending on specified raw material. The dimensions shown above are for HDPE buckets. Size A, B and C for Nylon and Urethane buckets will be about dimensionally 2% larger than HDPE buckets.

ELEVATOR BUCKETS
elevator conveyor bucket, elevator buckets

·Over 12 different elevator bucket styles are available for agricultural and industrial applications. 
·A direct replacement for many other international brands. 
·Unique elevator bucket design with multiple patents. 
·Our elevator buckets are well regarded, worldwide for high price/quality ratio.

ELEVATOR BUCKET MATERIAL OPTIONS

Material Mild Steel Stainless HDPE Nylon 6 Reinforced Nylon PU
Cost
Wear Resistance
Impact Resistance
FDA Food Approved
Max Temp℃ Continuous 180+ 250+ 70 100 110 70
Max Temp℃ Peak 220 400 80 120 130 80

 

HDPE: Tough and flexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than 1g/cm³ . 
Nylon: High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products. 
PU: Extremely abrasion resistance, tough and flexible, and are suitable for handling sharp, cutting and sticky products. 
Mild Steel: General purpose, long life, well suited to agricultural and industrial products. 
Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.

MEASURE OF ELEVATOR BUCKET

bucket elevator parts,

ELEVATOR BUCKET VENTING

A venting bucket can improve the efficiency of some bucket elevators when handling certain products. On dense materials such as lour, meals, and mash feeds, the vents allow air to escape through the cup as it fills, which permits the cup to fill more completely. During discharge, air can return through the cups as it empties, thus preventing a vacuum that could hold some of the products in the cup and cause backlegging.

On extremely light materials such as alfalfa meal, screenings and bran, a vented bucket not only minimizes blowing of the product during loading and discharge, but also reduces air turbulence in the leg as the bucket travels empty down the return side of the elevator. A reduction in air currents minimizes the vacuum which can draw a light product through the down leg and back to the boot.

We have four standard patterns available which offer varying amounts of air release for the handling of most products. Custom venting is available upon request.

VENTING OPTION

elevator bucket dataVent Pattern 1
One row of 6mm or 8mm
holes in body with same hole
center and number of holes as
mounting holes in back.

 

 

elevator bucket

 

Vent Pattern 2
One row of 6mm or 8mm holes
in body on 25mm centers.

 

 

elevator bucket

 

Vent Pattern 3
Two rows of 6mm or 8mm holes
in body on 25mm centers.

 

 

pu elevator, hdpe bucket elevator

Vent Pattern 4
Two rows of 6mm or 8mm holes
in body on 25mm centers, three
holes of 6mm or 8mm on each
side.

 

 

elevator conveyor bucket

 

Custom Vent
Vented as required.

One Comment

  1. how can we contact you?