Cotton Conveyor Belt

FEATURES

 EP-Conveyor-Belt

  • The carcass of this belt is made from cotton/cotton fabric both in warp and weft or terelyene/cotton fabric in warp and cotton fabric in weft
  • This type of belt will exhibit good flexibility, excellent trough-forming ability and is an economical solution for your conveying needs.

 

APPLICATIONS

  • Best suited for conveying products in short distance and suitable for but not limited to conveying of powder, granules and weak abrasive materials such assawdust, grain, coal and cements, etc.
  • Operating temperature: 10°C-60°C

 

BELT TYPES

Belt types include normal, oil resistant, acid and alkali resistant, cold resistant and anti-static grades

TECHNICAL DATA

Standard: In accordance to ISO/FDIS 14890:1990

Performance at Overall Thickness

Belt length can be customized on request and the maximum length is no more than 300 m.

Fabric Type Ply
Thickness
(mm)
Nominal Tensile Strength
at Overall Thickness
(N/mm)
Longitudinal
Elongation
at Break
(%)
Longitudinal
Elongation at
Rated Stress
(%)
Belt
Width
(mm)
Standard
Belt
Length
(M)
2ply 3ply 4ply 5ply 6ply
Terylene Cotton TC-70 1.0 140 210 280 350 420 ≥10 ≤4 300
~
1500
200
Cotton 

CC-56

1.0 112 168 224 280 336

 

 

 

 

 

Performance of Cover Rubber (for General Applications)

Note: The cover rubber performance for other belt types like oil resistant, acid and alkali resistant, cold resistant and

anti-static belt, please refer to the corresponding belt introduction.

Cover Grade Tensile Strength Elongation at Break
(%) ≥
Abrasion Loss
(mm³ ) ≤
Change Rate of Tensile
Strength & Elongation
after Aging (%)
(MPa) ≥ (Kg/c㎡) ≥
Ordinary Applications (L) 15.0 150.0 350 200 -25 ~ +25
Abrasion Resistant (D) 18.0 180.0 400 100 -25 ~ +25
Extreme Tear Resistant (H) 24.0 240.0 450 120 -25 ~ +25
When cover rubber thickness ranging from 0.8~1.60mm, it allows 15% tolerance of tensile strength.
Aging Test: 70℃×168h.

 

 

 

 

 

 

 

 

Adhesion-Ply to Ply

Item Canvas Ply to
Canvas Ply
Cover to Canvas Ply
Cover Thickness 0.8-1.5mm Cover Thickness >1.5mm
Average Value of Samples (N/mm) ≥ 3.0 2.1 2.7
Minimum Value of Samples (N/mm) ≥ 2.7 1.6 2.2
The peak value of all samples are less than 20N/mm.